UPDATE: Weather alert announced for strong thunderstorms in the Piedmont region Friday afternoon

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

An updated report was issued from the NWS Raleigh NC on Friday at 2:48 p.m. for strong thunderstorms until 3:45 p.m. The alert is for Johnston, Harnett, Hoke, Cumberland and Sampson counties.

Residents may experience wind gusts of up to 50 mph.

"At 2:48 p.m., Doppler radar tracked a cluster of strong thunderstorms along a line extending from near Lillington to near Fort Bragg to 7 miles east of Raeford. Movement was northeast at 20 mph," describes the NWS. "Gusty winds could knock down tree limbs and blow around unsecured objects."

Locations impacted by the alert include Fayetteville, Lillington, Fort Bragg, Dunn, Angier, Benson, Godwin, Pope AFB, Spring Lake and Erwin. This includes the following highways: Interstate 95 between Mile Markers 81 and 49. Interstate 40 between Mile Markers 316 and 330.

The NWS comments, "If outdoors, consider seeking shelter inside a building."

This alert is in effect until 3:45 p.m.

How to react when facing a lightning hazard?

Lightning strikes the United States about 25 million times a year. Most of the strikes occur in the summer, killing 20 people each year, according to the NWS. Chance of lightning increases as a thunderstorm approaches and peaks when the storm is overhead. It diminishes as the storm moves away.

Here are suggestions for staying safe during a thunderstorm:

• To lower the risk of lightning strikes, when going outdoors, develop a plan to reach a safer spot.
• If the sky turns ominous and thunder can be heard, find a secure place for shelter.
• Once indoors, avoid touching corded phones, electrical equipment, plumbing, and windows and doors.
• Wait 30 minutes after the last lightning or thunder before going back outside.

If finding indoor shelter is not an option:

• Steer clear of open fields, hilltops, or ridge tops.
• Keep a distance from tall, solitary trees or other elevated structures. When in a forest, stay in proximity to shorter tree groupings.
• If you are in a group, spread out to avoid the current traveling between group members.
• When camping in an open environment, select a campsite in a valley, ravine, or low region. Just remember, tents do not offer protection from lightning.
• Stay away from water, wet items, and metal objects. Water and metal do not attract lightning but they are excellent conductors of electricity.

What to do in the rain on the road?

• Turn on headlights - Even in daylight, using headlights can help improve visibility and let other drivers know where you are.
• While driving - Stick to the middle lanes and stay on elevated ground. Rainwater tends to accumulate at the road edges.
• Avoid puddles - Driving into puddles or low rainwater areas can lead to vehicles hydroplaning or losing control.
• Maintain a safe distance from large vehicles - Trucks or buses can produce a water spray that hampers visibility.
• Avoid flooded areas - When encountering a flooded road, do a U-turn and head back. The strong currents from flash floods can pull drivers off roadways. Driving through deep water can also negatively affect a vehicle's mechanical and electrical systems.

What is hydroplaning?

Hydroplaning is when a vehicle starts uncontrollably sliding on wet roads.

This happens when water in front of the tire builds up faster than the vehicle's weight can push water out of the way. The water pressure then causes the vehicle to rise and slide on a thin layer of water between the tires and the road, making the driver lose control. Hydroplaning is most commonly attributed to three factors:

1. Vehicle speed - When a vehicle's speed increases, the tire-traction grip and ability to control the vehicle decreases. Drive at a reduced speed during wet weather.
2. Water depth - The deeper the water, the sooner a vehicle loses traction on the road. It doesn't matter how deep the water is, even a thin layer can lead to hydroplaning.
3. Tire tread depth - Checking your tire tread before hitting the road is important, as low or no tread can lead to sliding.

In the event of your vehicle hydroplaning, here's what to know:

• Ease off the accelerator - Step off the gas to slow down the vehicle until the tires find traction.
• Turn into the skid - Turning into the skid can help the vehicle's tires realign to regain control.
• Make sure the tires reconnect with the road - During the skid, wait until the tires reconnect with the road and then gently straighten the wheels to regain control.
• Brake gently as needed - Brake normally if the vehicle has anti-lock brakes and pump brakes gently if in an older vehicle.

Source: The National Weather Service

United Robots North Carolina

This story was originally published June 26, 2026 at 2:14 PM.